0Patiko

Happymodel Moblite7 V3.0 Walksnail 1S 75mm HD Whoop FPV Racing Drone with Walksnail Avatar Nano HD Digital System

4.7

★★★★★

$245.99 /$300.11

*Name:
*Email:
*Phone:
*Quantity:
*Content:
Attachment:

Supports JPG, JPEG, PNG, PDF, EXCEL, WORD, RAR, ZIP, 7z formats

$233.99 /$300.11

Pirkti dabar Pridėti į krepšelį

Kredito ar debeto kortelė

Garantuotas saugus apmokėjimas

Nemokama dovana

Nemokama dovana su bet kokiu pirkiniu

Pristatymo politika

Nemokamas standartinis pristatymas užsakymams virš $9.9

Grąžinimo politika

Prekės priimamos grąžinti per 40 dienų nuo gavimo datos. Individualios prekės negrąžinamos. Prekės įsigytos su dovanų kuponu gali būti tik keičiamos; grąžinimas negalimas.

Nemokama Dovana

Sveiki atvykę į Roymall, jūsų profesionalią dovanų parduotuvę. Vertiname jūsų paramą ir norėdami parodyti dėkingumą, siūlome nemokamą dovaną su kiekvienu užsakymu.

Pristatymo Politika

Prekės pristatomos per 2-5 darbo dienas. Užsakymai virš $9.9 pristatomi nemokamai.

1. Grąžinimo Politika

Prekės galima grąžinti per 40 dienų. Individualios prekės negrąžinamos.

2.Grąžinimo Sąlygos

Pinigai grąžinami originaliu apmokėjimo būdu.

V2.0 update log:

1. Changed to GNB27 connector and V4 frame, no need 3d print battery tray anymore.

2. Changed the propeller to Gemfan 1635-3 propellers.

V3.0 Update log:

1. ELRS RX Version, Flight Controller AIO ESC board change into SuperX HD ELRS Flight Controller

2. Frsky Receiver Versions still v2 version.

3. Changed to A30 connector

Notes:

1. Recommend use the battery with lead wire, both A30 and BT2.0 plug battery are compatible.

2. NOT Included Lipo battery!

Specification:

Brand: Happymodel

Model: Moblite7 Walksnail V3

Item Name: 1S 75mm HD Whoop FPV Racing Drone

Frame wheelbase: 75mm
Weight: 34.5 gram without battery
Size: 98mm*98mm*48mm
UART ELRS v3.0 ready
Compatible with 1S Lipo battery or Lihv battery
Battery Plug: GNB A30

Onboard blackbox ready

	New V3.0 Version	Old Version
Flight Controller	SuperX HD ELRS Flight Controller Betaflight 4.4.2 firmware readyFirmware target: CRAZYBEEF4DXMCU:STM32F411CEU6 (100MHz, 512K FLASH)Sensor: BMI270 or ICM42688P (SPI connection)Power supply: 1-2S Lipo Lihv battery input (DC 2.8V~8.7V), only support 1s input for this droneBuilt-in 12A(each) Blheli_S 4in1 ESC Dshot300 readBuilt-in UART elrs receiver , elrs v3.0 ready, support WIFI and pass-through firmware updateBluejay ESC Firmware readyBuilt-in 5V 1A BECBuilt-in voltage detectionNo betaflight analog osd chip	SuperbeeF4 Lite ELRS/FRSKY SPI ELRS version Firmware target: CrazybeeF4SX1280 SPI FRSKY version Firmware target: CrazybeeF4FR MCU:STM32F411CEU6 (100MHz, 512K FLASH) Sensor: MPU-6000 or ICM20689 or BMI270(SPI connection) Power supply: 1S Lipo Lihv battery input (DC 2.8V~4.35V) Built-in 5A(each) Blheli_S 4in1 ESC Dshot600 ready Built-in Betaflight OSD(SPI Control) Built-in SPI Frsky/ExpressLRS receiver Built-in 5V 1A BEC Built-in voltage detection
Onboard 4in1 ESC	Power supply: 1-2S LiPo/LiPo HVCurrent: 12A continuous peak 15A (3 seconds)Support ESC-Configurator and BLHELI_S Suite configuratorFactory firmware: Z-H-30 u2013 Bluejay, 0.19, 48kHzDefault protocol: DSHOT300	MCU upgraded to EFM8BB21 Power supply: 1S LiPo/LiPo HV (2.8v~4.35v) Currents: 5A continuous peak 6A (5 seconds) Support BLHeliSuite programmable Factory firmware: O_H_5_REV16_8.HEX Default protocol: DSHOT150/DSHOT300/DSHOT600
Onboard Receiver	ELRS Receiver Version: Onboard UART ExpressLRS 2.4GHz Receiver RF Frequency: 2.4GHzAntenna: enameled copper wire 31mm lengthTelemetry output Power: <12dBmReceiver protocol: CRSFDefault firmware version: ExpressLRS V3.0.1The same hardware with Happymodel EP1 receiverCould update firmware via ExpressLRS configurator or WIFI or Betaflight pass-through Frsky Receiver: Doesn"t have V3 Version.	ELRS Receiver Version: Packet Rate option: 25Hz/50Hz/150Hz/250Hz/500Hz RF Frequency: 2.4GHz Telemetry output Power: <12dBm Receiver protocol: SPI ExpressLRS Could bind with ELRS V2.0 firmware TX module Frsky Receiver Version: SPI BUS receiver Frsky D8/D16 compatible Compatible Non EU transmitter D8 model and EU-LBT(Frsky_x_lbt) Channels: 8ch or 16ch Failsafe support No ground interference ( Transmitter and receiver 1 m from the ground): 100m~200m Based on CC2500 RF module Compatible with Futaba S-FHSS , Redpine protocol

Motor	Model: 1002 20000KVConfigu-ration:9N12PStator Diameter:10mmStator Length:2mmShaft Diameter:u03a61.5mmMotor Dimension(Dia.Len):u03a613.5mm12.5mmWeight(g):2.5gNo.of Cells(Lipo):1S only
Propeller Gemfan 1610-2 Bi-blades ( V1 )	Weight:0.24gMaterial: PCPitch:1 inchProps Dia:40mmCenter Hole Dia:1.5mm
VTX	Model: Avatar mini 1s moduleCommunication Frequency: 5.725-5.850 GHzTransmitter Power(EIRP): FCC:<25.5dBm; CE:<14dBm; SRRC: <20dBm;MIC:<25dBml/o Interface: JST1.O6(Power in)JST1.O4(USB)Mounting Holes: 25.525.5 mmDimensions: 3333*6.5 mmStorage: 8GRecording: 1080p/720pWeight: 6.8 gOperating Temperature: -20-40u2103Channels: 8Wide Power lnput: 3.1V-5VSupported FC System: BetaflightOSD: Canvas modeBitrate: 25mbps / 50mbpsLatency: Average delay 22msAntenna connector: IPEX
FPV Camera	Model: Avatar nanolmage Sensor: 1/2.7u201dInchResolution: 1080P/6Ofps,720P/120fps,72OP/6OfpsRatio: 16/9 4/3Lens: 2.1mmFOV 170u00b0Aperture: F2.0Shutter: Rolling shutterMin.Illumination: 0.001LuxWeight: 3.5gDimensions: 141417mmCoaxial Cable: 45mm

Package Included:

1x Moblite7 V3 Walksnail FPV Drone

1x Spare Canopy

1x Propeller disassemble tool

1x Screw driver

Pirkti su Paypal

Products related to this item

Loading related products...

❮

❯

Videos for similar product

Loading product videos...